黏弹性准饱和土中球空腔动力特性

在频率域内研究了内水压力作用下分数导数型黏弹性准饱和土中球空腔的稳态动力响应. 通 过引入与孔隙率有关的应力系数合理地确定了介质和孔隙水共同承担的内水压力值. 将土骨 架和衬砌分别视为具有分数导数本构模型的黏弹性体和多孔柔性材料, 基于Biot两相介质模 型, 通过引入位移势函数解耦得到了内水压力作用下分数导数型黏弹性准饱和土中半封闭球 形空腔的位移、应力和孔隙水压力解析表达式. 考察了物性和几何各参数对球形空腔动力响 应的影响, 结果表明: 分数导数本构模型更合理地描述了土体的动力学行为; 饱和度对应力 和孔隙水压力影响较大, 而对位移影响较小.     

Comparative analysis of CFD models for jetting fluidized beds: Effect of particle-phase viscosity

Under the Eulerian–Eulerian framework of simulating gas–solid two-phase flow, the accuracy of the hydrodynamic prediction is strongly affected by the selection of rheology of the particulate phase, for which a detailed assessment is still absent. Using a jetting fluidized bed as an example, this work investigates the influence of solid rheology on the hydrodynamic behavior by employing different particle-phase viscosity models. Both constant particle-phase viscosity model (CVM) with different viscosity values and a simple two-fluid model without particle-phase viscosity (NVM) are incorporated into the classical two-fluid model and compared with the experimental measurements. Qualitative and quantitative results show that the jet penetration depth, jet frequency and averaged bed pressure drop are not a strong function of the particle-phase viscosity. Compared to CVM, the NVM exhibits better predictions on the jet behaviors, which is more suitable for investigating the hydrodynamics of gas–solid fluidized bed with a central jet.     

Synchronization of three homodromy coupled exciters in a non-resonant vibrating system of plane motion

In this paper, the synchronization problem of three homodromy coupled exciters in a non-resonant vibrating system of plane motion is studied. By introducing the average method of modified small parameters, we deduced dimensionless coupling equation of three exciters, which converted the problem of synchronization into that of the existence and stability of zero solutions for the average differential equations of the small parameters. Based on the dimensionless coupling torques and characteristics of the corresponding limited functions, the synchronization criterion for three exciters was derived as the absolute value of dimensionless residual torque difference between arbitrary two motors being less than the maximum of their dimensionless coupling torques. The stability criterion of its synchronous state lies in the double-condition that the inertia coupling matrix is positive definite and all its elements are positive as well. The synchronization determinants are the coefficients of synchronization ability, also called as the general dynamical symmetry coefficients. The double-equilibrium state of the vibrating system is manifested by numeric method, and the numeric and simulation results derived thereof indicate the indispensable and crucial role the structural parameters of the vibrating system play in the stability criterion of synchronous operation. Besides, by adjusting its structural parameters, the elliptical motion of the vibrating system successfully met the requirements in engineering applications.     

3-脱氢莽草酸甲酯与肼类化合物反应的选择性

以可再生生物质资源莽草酸为原料, 在经酯化和2-碘酰基苯甲酸(IBX)氧化制得3-脱氢莽草酸甲酯的基础上, 研究了在不同反应溶剂中和不同反应温度下, 3-脱氢莽草酸甲酯分别与水合肼、 乙酰肼、 苯肼和乙酰胺选择性地得到非芳构化、 部分芳构化和芳构化产物的反应. 该方法具有选择性高、 操作简单和条件温和等优点, 为可再生非粮生物质资源莽草酸的利用提供了一种新的思路.     

Raman microspectroscopic mapping or thermal system used to investigate milling‐induced solid‐state conversion of famotidine polymorphs

Confocal Raman microspectroscopy was used to nondestructively determine the polymorphic conversion of famotidine in the course of the milling process. A mapping system was applied to assess the blending uniformity of each polymorphic component in the milled mixture. Raman microspectroscopy combined with a thermal analyzer was also used to investigate the synergistic co‐effects of milling and heating on the polymorphic conversion of famotidine polymorphs. Famotidine has two polymorphs, forms A and B, the raw material of famotidine used was proved to be of form B. The Raman peak intensity ratio of the 2920 cm⁻¹ band for form A and 2897 cm⁻¹ band for form B was used to act as an indicator to evaluate the polymorphic conversion of famotidine form B to form A after different milling courses. The results indicate that the peak intensity at 2897 cm⁻¹ gradually decreased with the milling time, whereas the peak intensity at 2920 cm⁻¹ slowly enlarged, suggesting the polymorphic conversion of famotidine from form B to form A. The longer milling process might strongly induce and promote this polymorphic conversion of famotidine. Both polymorphic forms of famotidine were found to be well uniformly distributed within the milled samples due to their smaller varieties by using the Raman microscopic mapping system. The temperature effect could synergistically accelerate the polymorphic conversion of famotidine from form B to form A in the milled sample. The thermal‐dependent critical temperature for sharply enhancing the content of famotidine form A in each milled sample was also identified. Copyright © 2007 John Wiley & Sons, Ltd.     

水相中微波辐射下芳基硫醚衍生物的铜催化合成

开展了水相中硫脲与碘代芳烃反应生成芳基硫醚衍生物的微波辅助合成研究。 高效地合成了一系列的芳基硫醚衍生物,最高收率达到90%。     

三功能合一的含铽高聚物的光谱性质研究

制备了一种新型的可平衡电荷(空穴与电子)传输的含铽高聚物。用红外光谱、飞行时间二次离子质谱、紫外光谱研究了其光谱性质,确认这种高聚物含有咔唑、铽络合物、噁二唑单元。用荧光光谱研究了不同状态下高聚物的荧光性质,来自共轭基团的荧光出现“荧光猝灭”。在紫外光照射下,高聚物可发出具有铽离子特征发射的纯绿光。     

一种新型的可生物降解的热敏凝胶微粒的制备

聚合物水凝胶是由高分子组成的三维空间交联网络与水的混合体系,有望在药物控制释放等领域获得广泛应用,某些水凝胶还具有显著的环境响应性,构成了一类主流的智能材料,在生物医用材料领域,对于材料的可降解性有严格要求,而单一的可降解药物缓释载体材料和单一的智能型水凝胶材料已有较多报道,但能够将这两种特性结合在同一种材料中的报道则很少,其中智能响应范围合适、降解速率易于大范围调节的合成水凝胶则更少。     

镶嵌钨硅酸的新型有机-无机纳米复合薄膜的制备及光致变色性能研究

将超分子自组装技术与Sol-gel过程相结合,制备了镶嵌Keggin结构钨硅酸的MAAM/VTEOS/TEOS纳米复合薄膜,并采用IR,XRD和TG-DSC等方法对薄膜进行了结构表征.在复合薄膜光照变蓝后,通过UV-Vis和ESR光谱对薄膜的光致变色性能及其机理进行了研究.结果表明,钨硅酸在复合网络中仍保持Keggin结构,与有机-无机复合基体中的-NH₂通过氢键发生强烈的相互作用,经紫外光照后发生电荷转移,[SiW₁₂O₄0]₄^-被还原为[SiW₁₂O₄0]₅^-,同时产生氨基自由基.褪色过程则与氧气存在与否有关,实验结果表明,该薄膜具有良好的光致变色性能,对光有较快的响应恢复速度和良好的可逆重复性.